54
of 148
5.4.4.7 Device setting menu
The device settings can be saved and loaded from this menu.
The following entries are possible:
[F4] key (HOME):
This effects a return to the main menu.
The [
↑
] and [
↓
] cursor keys are used to select the various parameters in the menu. The selected parameter is
displayed inversely. Only the selected parameter can be changed.
The [POS1] key is used to select the 1st parameter in the window.
The [END] key is used to select the last parameter in the window.
STORE NUMBER.
Here, you can enter a number between 0 and 31 under which the device setting is to be
saved (the number can also be set with the [
→
] and [
←
] cursor keys).
Pressing the [F1] key (INPUT) invokes the input mode, where you can enter a new number.
Numeric keys [0] to [9] are used to enter a new value.
The [BSP] key is used to delete the character entered last.
The [ESC] key is used to cancel the current entry, and exit the input mode. The original value is retained in
this case.
The [C] key is used to delete all the entered characters and repeat the input procedure from the beginning,
without exiting the input mode.
Pressing the [ENT] key completes the entry, saves the new value if it is valid, and exits the input mode.
LOAD NUMBER.
A number between 0 and 31 is entered here to load the corresponding device setting (the
[
→
] and [
←
] cursor keys can also be used for this purpose). The default settings are stored under number 32
(which is labelled accordingly).
Pressing the [F1] key (INPUT) invokes the input mode, where a new number can be entered.
Numeric keys [0] to [9] are used to enter a new value.
Display for saving and loading
device settings
Note
If the changeover is made by the
PLC inputs, the datalogger block
will be changed as well.
If the changeover is made by the
keypad, the datalogger block will
not be changed.
INPUT STOR LOAD
HOME
STORE/LOAD CONFIG.
STORE NUMBER: 12
LOAD NUMBER: 8
LABEL ST.:
1234567890
LABEL LD:
0987654321
