46
of 148
DELETE
datalogger:
If this parameter is selected, the [F1] key (DEL1) and [F2] key
(DEL2) are also activated.
The [
→
] and [
←
] cursor keys are used to set the following values:
ALL
The entire datalogger is deleted.
BLOCK
The selected block is deleted.
Pressing the [F1] key (DEL1) and the [F2] key (DEL2) in turn deletes the datalogger or the selected block. The
(DEL2) key serves for acknowledgement here.
5.4.4.3 Comparator setting menu
The comparator is configured in this menu.
The following entries are possible:
[F3] key (HOME):
This effects a return to the main menu.
[F4] key (RETUrn):
This effects a return to the parameter selection menu or the comparator evaluation
menu, depending on where the present menu was invoked from.
The [
↑
] and [
↓
] cursor keys are used to select the various parameters in the menu. The selected parameter is
displayed inversely. Only the selected parameter can be changed.
The [POS1] key
is used to select the 1st parameter in the window.
The [END] key
is used to select the last parameter in the window.
The [
←
] and [
→
] cursor keys are used to turn the
COMPARATOR
ON and
OFF.
Note:
When the comparator is on, the comparator evaluation
<<
<
=
>
>>
appears in the large measurement display, depending on the selected display menu
(page
49).
If "OHM" has been selected, a small display of the evaluation appears in the error
window.
The [
←
] and [
→
] cursor keys are used to set the
COUNT OF LIMITERS
to
2 or 4.
Comparator-
setting menu
page 1
INPUT
HOME
RETU
COMPARATOR
S 1
COMPARATOR: OFF
COUNT OF LIMITS : 2
RELAYS: ON
ON ERROR:
NONE
