Burster RESISTOMAT 2329, Operation Manual

Page: 22 / 148

22
of 148
5.1.4 Measurement rate
The RESISTOMAT ® model 2329 was developed to allow quick and reliable measurements of ohmic resistances.
The hardware and software are geared especially toward PLC-controlled measurements. The fastest
measurements are achieved by triggering via a PLC or footswitch and evaluation of the results in combination
with EOC. The single-frame measurement mode and manual range selection are used as a rule.
Every additional function increases the load on the process and reduces the achievable measurement rate.
Activating the temperature compensation
slows down the measurement procedure.
The times must be determined with the
following factors:
Note:
All times were determined with the following settings:
Measurement procedure: Standard, "R" (identical to SINGLE-COMP during single-frame measurements).
No temperature compensation, no interface operation, no max.-min., no datalogger, no printer, no comparator.
Range selection: Manual
Times are measured from the falling edge of the footswitch to the rising edge of the PLC - EOC.
Internally, the free processor capacity is always made available to the measurement procedure. Every
additionally activated function and every interface command (PLC, printer, RS232 and IEEE488) slows down
the measurement.
Resolution
range
20.000
C min
20.000
C med
20.000
C stand
20.000
C max
2.000
C min
2.000
C med
2.000
C stand
2.000
C max
200 m
Ω
45 ms 78 ms 145 ms 276 ms 15 ms 20 ms 39 ms 91 ms
2
Ω
45 ms 78 ms 145 ms 276 ms 15 ms 20 ms 39 ms 91 ms
20
Ω
22 ms 40 ms 80 ms 145 ms 15 ms 20 ms 39 ms 65 ms
200
Ω
22 ms 40 ms 80 ms 145 ms 15 ms 20 ms 39 ms 65 ms
2 k Ω 30 ms 50 ms 80 ms 145 ms 15 ms 20 ms 39 ms 65 ms
20 k
Ω
74 ms 95 ms 158 ms 263 ms 22 ms 26 ms 45 ms 72 ms
200 k
Ω
283 ms 336 ms 442 ms 756 ms 76 ms 80 ms 100 ms 179 ms
20 mV 107 ms 187 ms 345 ms 660 ms 35 ms 55 ms 82 ms 240 ms
C = Conversion settings (see chapter 5.4.4.1)
Range Resolution
20.000
Resolution
2.000
200 m
Ω
1.8 1.8
2
Ω
1.8 1.8
20
Ω
1.8 1.8
200
Ω
1.8 1.8
2 k
Ω
1.8 1.8
20 k Ω 2.1 2.1
200 k
Ω
2.5 2.5
20 mV 1.8 2.6