57
2
Enter the IP address of the TeraStation into the "Target" box and click
Quick Connect
.
3
Confirm if the connection is established and click
Done
.
Connecting a volume is finished.
Formatting Volumes
If using the connected volume for the first time, the volume should be formatted to be used as a local drive. Follow
the procedure below for formatting.
1
In Windows, navigate to
Control Panel
-
Administrative Tools
-
Computer Management
.
2
Click
Disk Management
.
When the "Initialize Disk" screen is displayed, click
OK
without changing any settings.
3
Right-click the drive volume that shows the status "Unallocated" and click
New Simple Volume
from the
displayed menu. Follow the screen to finish formatting.
Formatting a volume is finished. When the formatting process is completed, the drive will be visible as an icon in
Computer or My Computer and can be used as a normal drive on the computer.
Disconnecting a Volume
1
In Windows, navigate to
Control Panel
-
Administrative Tools
-
iSCSI Initiator
.
The status of the connecting volume will be displayed as "Connected" under "Discovered targets".
2
Select a volume to disconnect and click
Disconnect
.
3
Click
Yes
.
4
When the volume status is displayed as "Inactive", the disconnection was carried out properly.
Summary of Contents for TeraStation 5010
