manualshive.com logo in svg

Buffalo TeraStation 5010, User Manual, Page: 12 / 176

Share
Download
Buffalo TeraStation 5010 User Manual Download Page 12

11

19 

Power Connector
Use the included power cable to connect to an UPS, surge protector, or outlet.

20 

Anti-Theft Security Slot (   )
Use this slot to secure your TeraStation with a cable lock (not included).

21 

Serial Number
This sticker shows the TeraStation's serial number.

22 

UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.

23 

Link LED
Glows green when the unit is connected to a network.

24 

100 Mbps Link LED
Glows amber when the unit is connected to a network at 100 Mbps.

25 

1000 Mbps Link LED
Glows green when the unit is connected to a network at 1000 Mbps.

26 

10 Gbps Link LED
Glows blue when the unit is connected to a network at 10 Gbps.

Turning the TeraStation On and Off

Note: 

Do not disconnect or reconnect the internal drives while turning on or off the TeraStation.

Press the power button on the TeraStation to turn it on.
To turn off the TeraStation, press and hold the power button for 3 seconds. Don't unplug the TeraStation without 
turning it off first. You can also shut it down and restart it remotely from Settings.

1 

Double-click the 

 icon to start NAS Navigator2.

Summary of Contents for TeraStation 5010

















































































































































































Reviews:

No comments