manualshive.com logo in svg

Buffalo TeraStation 5010, User Manual, Page: 112 / 176

Share
Download
Buffalo TeraStation 5010 User Manual Download Page 112

111

5 

Select the port trunking mode and click 

OK

.

6 

Connect the hub's LAN port and TeraStation's LAN port using the second LAN cable. If you are using an 
intelligent switch, connect to the LAN port that was previously configured for port trunking.

7 

Restart the TeraStation before use.

Offline Files

The "offline files" feature that is included with many versions of Windows can be used with files on the TeraStation. 
You will be able to work on files stored on the TeraStation even when your PC is disconnected from the network. 
When you next connect to the network, the updated files are written and synchronized. Follow the procedure below 
to configure offline files.

1 

In Settings, click 

File Sharing

.

2 

Click 

 to the right of "Folder Setup".

3 

Click the shared folder for offline files.

4 

Click 

Edit

.

5 

Choose "Manual caching of documents", "Automatic caching of documents", or "Automatic caching of 
programs and documents", then click 

OK

.

•  "Manual caching of documents" - User selects files that are cached.
•  "Automatic caching of documents" - Opened files can be cached locally for offline use. Previous versions of 

files that are not synchronized are automatically replaced by the latest versions.

Summary of Contents for TeraStation 5010

















































































































































































Reviews:

No comments