Buffalo TeraStation 5010, User Manual

Page: 57 / 176

56
If you enabled LVM for the target drive or array, or selected "File I/O" for the "Backstore" option, the volume size
that you specify here can be changed later. To change the volume size, refer to the "Expanding Volume Sizes"
section below.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK .
7
Click OK , then Close .
Note: If you click Disable Connection for the selected volume in Storage - iSCSI in Settings, the selected iSCSI
volume can no longer be accessed. If you click Enable Connection , the volume will become accessible from the
iSCSI initiator software.
Connecting or Disconnecting Volumes
Note: By default, the IP address of the TeraStation is automatically assigned from a DHCP server. However, in
this case, if you turn off and restart the TeraStation, the IP address may be changed and the volumes on the
TeraStation may not be accessible. To avoid changing the IP address unexpectedly, using a fixed IP address for
the TeraStation is recommended.
Connecting Volumes
To connect a volume, follow the procedure below.
Note: Do not shut down the TeraStation while connecting to an iSCSI volume. It may cause unexpected data
erasure. Make sure all connections are disconnected before shutdown.
1
In Windows, navigate to Control Panel - Administrative Tools - iSCSI Initiator .