Buffalo TeraStation 5010 User Manual Download Page 156

Page: 156 / 176

155

Name

Description

LinkStation or
TeraStation Name

Browse Shares

Opens the selected LinkStation's or TeraStation's shared
folders.

Settings

Opens Settings for the selected LinkStation or TeraStation.

Properties

Opens the selected LinkStation's or TeraStation's properties
page.

Map Share

Assigns the LinkStation's or TeraStation's shared folder as a
network drive.

Disconnect Share

Unmaps the network drive.

Create Shortcut

Creates a desktop shortcut to the selected LinkStation's or
TeraStation's shared folders.

I'm here

Causes your TeraStation to beep.

Refresh

Refreshes list of NAS devices.

Browse Shares

Displays NAS Navigator2 window.

Exit

Exits NAS Navigator2.

The following tasks may be performed from the LinkStation's or TeraStation's properties page.

Summary of Contents for TeraStation 5010

















































































































































































Search results

Summary of Contents for TeraStation 5010

Reviews:

Buffalo TeraStation 5010, User Manual, Page: 156 / 176

Search results

Summary of Contents for TeraStation 5010

Reviews: