Buffalo TeraStation 5010 User Manual Download Page 21

Page: 21 / 176

Settings will open.

Notes:

• Username/Password Combinations:

Username

Password

Settings Available

admin

password

All

guest

blank

System information (read-only)

Your username

Your password

If a user is assigned as an administrator, all settings
are available. If assigned under another group, only
system information (read-only) is available.

• Click

to open Easy Admin.

• Click

to play a tone from the TeraStation for easy location.

Opening Easy Admin

The Easy Admin page makes it easy to change common settings. Follow the procedure below to open Easy Admin.

Double-click the

icon to start NAS Navigator2.

Summary of Contents for TeraStation 5010

















































































































































































Search results

Summary of Contents for TeraStation 5010

Reviews:

Related manuals for TeraStation 5010

Brands by name

Popular brands

Buffalo TeraStation 5010, User Manual

Search results

Summary of Contents for TeraStation 5010

Reviews:

Related manuals for TeraStation 5010

Brands by name

Popular brands