Buchi Interface I-300 Operation Manual Download Page 79

Page: 79 / 102

BÜCHI Labortechnik AG

Cleaning and servicing | 7

Operation Manual Interface I-300 Pro

79/102

Navigate to the

Maintenance

sub-screen and select the menu item

[Test re-

sults]

, see Chapter 6.1 "Navigating the menu", page 44.

The display shows the

Test results

view.

Select a leak test from the list.

The display shows the readings obtained in the leak test.

7.4

Fitting GL14 cap nut with tube seal

Fig. 67: Fitting GL14 cap nut with tube seal (example shows VacuBox)

Tube seal

Tubing

GL14 cap nut

Insert the tube seal (1) in the GL14 cap nut (2) ensuring it is straight.

NO-

TICE! Risk of damaging tube seal.

Make sure that the tube seal does not twist

or jam in the GL14 cap nut.

Loosely screw the GL14 cap nut together with tube seal onto the device con-
cerned (example shows VacuBox) or the Woulff bottle.

Carefully insert the end of the tube (3) into the GL14 cap nut and tube seal.

Tighten the GL14 cap nut and tube seal.

7.5

Checking seals

Seals are wearing parts. They have to be regularly inspected, cleaned and, if neces-
sary, replaced. The life of a seal depends on how much it is used and how well it is
looked after.

Summary of Contents for Interface I-300







































































































Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands

Buchi Interface I-300, Operation Manual

Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands