10 | Appendix
BÜCHI Labortechnik AG
96/102
Operation Manual Interface I-300 Pro
10.5
Handling data
The following communication details relate to Version 1.0 of the interface. Information
is subject to amendment in respect of extent and content.
NOTE
External control of the equipment via the BUCHI Cloud is not implemented.
Data transmission via the LAN interface to the server
Category
Frequency
System data:
Serial number of interface unit
System name of interface unit
Interface unit model (I-300 or I-300
Pro)
Firmware version of interface unit
MAC address of interface unit
Every time connection is established
Status data:
Process status (e.g. "Ready", "Run-
ning")
Whenever process changes
Event data:
(Messages that appear as pop-ups on
the display, e.g. "Distillation successfully
completed")
Event message ID
Event message level (information,
warning or error)
On occurrence
Event messages are managed by the
server and distributed to the clients from
there for push notifications.
Process data:
Actual reading and specified setting
for pressure
Actual reading and specified setting
for heating bath temperature
Actual reading and specified setting
for recirculating chiller temperature
Actual reading and specified setting
for rotation speed
Actual reading and specified setting
for timer
Actual vapor temperature
Results (stop status, foam detection,
receiving flask full)
Timestamp
Regular data transmission
When process is running: once per sec-
ond at most
On standby: at least every 60 seconds
All of the above data (except MAC address) is broadcast to the connected clients
(e.g. mobile phone) and processed there.
