Buchi Interface I-300 Operation Manual Download Page 53

Page: 53 / 102

BÜCHI Labortechnik AG

Operation | 6

Operation Manual Interface I-300 Pro

53/102

Select the parameter that is to be adjusted while distillation is in progress, see
Chapter 6.1 "Navigating the menu", page 44.

The display shows the selected parameter setting highlighted in inverse type.

Fig. 30: Editing parameters while distillation is in progress

Raise or lower the selected parameter setting.

While the parameters are being edited, the distillation process continues run-

ning in the background (identifiable by the

symbol on the status bar).

After the parameter setting has been altered, the display shows the home screen
in inverse type with the current readings displayed more brightly.

Stopping manual distillation

To stop the distillation process, press the function button STOP.

The display shows the home screen with the current readings and specified set-
tings. The status bar shows the cooling symbol, if applicable, together with a timer
that is counting down.

6.2.4

Executing Timer mode

[Timer]

mode, a distillation process with a predefined duration is started.

CAUTION

Risk of personal injury and property damage from unexpected equip-
ment behavior

Always carefully check the pre-programmed settings before every distillation
process.

Navigation path

➔

Operating modes

➔

Timer

Summary of Contents for Interface I-300







































































































Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands

Buchi Interface I-300, Operation Manual

Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands