Buchi Interface I-300 Operation Manual Download Page 29

Page: 29 / 102

BÜCHI Labortechnik AG

Installation | 5

Operation Manual Interface I-300 Pro

29/102

Installation

5.1

Fitting the Interface I-300/I-300 Pro

The Interface I-300/I-300 Pro can be mounted on one of the following BUCHI labora-
tory devices:

Rotavapor R-300

Vacuum Pump V-300

Rotavapor R-220 Pro

Alternatively, the Interface I-300/I-300 Pro can be mounted separately on a laboratory
stand, see Chapter 5.1.4 "Mounting interface unit on laboratory stand (optional acces-
sory)", page 33.

5.1.1

Mounting interface on Rotavapor R-300

The Interface I-300 Pro can be mounted and connected up on the vertically ad-
justable arm of the Rotavapor R-300.

Tools required: Torx keys Tx20 and Tx30

Fig. 7: Handle of Rotavapor R-300

Cover

Fixing screw for cover

Communication cables

Remove the screw on the underside of the vertically adjustable arm (3) using a
Torx key and remove the cover (1) from the top of the arm.

Remove the pre-fitted communication cable (2) from the cover.

Summary of Contents for Interface I-300







































































































Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands

Buchi Interface I-300, Operation Manual

Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands