6 | Operation
BÜCHI Labortechnik AG
58/102
Operation Manual Interface I-300 Pro
u
Navigate to the
Operating modes
menu and select the menu item
[Continuous
pumping]
, see Chapter 6.1 "Navigating the menu", page 44.
ð
The display shows the home screen with the symbol for continuous pumping
in the status bar.
Fig. 38:
Continuous pumping
screen.
NOTE
In
[Continuous pumping]
mode, only the following parameters can be edited: Rota-
tion (rotation speed of the evaporating flask), Heating bath (temperature) and Recir-
culating chiller (temperature). Those processes cannot be started via the interface
unit and instead have to be started manually on the equipment concerned.
u
Select and edit the settings for individual process parameters as necessary.
u
Press the function button
START
to start the drying process.
ð
The drying process continues running until it is stopped manually.
Fig. 39: Continuous pumping for drying the system started
u
To edit individual process parameters while drying is in progress, select and edit
the parameter concerned in each case.
u
To stop the drying process, press the function button
STOP
.
In this operating mode, the following parameters and readings are available:
