Buchi Interface I-300 Operation Manual Download Page 11

Page: 11 / 102

BÜCHI Labortechnik AG

Product description | 3

Operation Manual Interface I-300 Pro

11/102

Rotavapor R-300

Rotavapor R-220 Pro

Interface unit
mounting

Option: I-300 or I-300 Pro
mounted on Rotavapor arm, see
Chapter 5.1.1 "Mounting inter-
face on Rotavapor R-300",
page 29.

Ready mounted: I-300 Pro
mounted on device directly adja-
cent to internal display, see
Chapter 5.1.3 "Mounting inter-
face unit on Rotavapor R-220
Pro", page 32.

Information on
display

Full display of figures and
graphs on display of I-300 Pro.

Display of figures and graphs
split between I-300 and R-220
Pro.

Lift control

Manual and programmed control
of lift position possible, see
Chapter 6.10 "Controlling lift po-
sition via the interface unit",
page 76.

Manual adjustment of lift posi-
tion possible, see Chapter 6.10
"Controlling lift position via the
interface unit", page 76.

Communica-
tion cable con-
nection

See operating instructions for
the Rotavapor R-300.

See operating instructions for
the Rotavapor R-220 Pro.

Connections

External valves connected to
VacuBox, Chapter 5.5 "Connect-
ing valve unit for external vac-
uum", page 42.

External valves connected di-
rectly to R-220 Pro.

[Manual]

oper-

ating mode

Distillation carried out with man-
ually set parameters. See Chap-
ter 6.2.3 "Executing Manual
mode", page 50

[Timer]

mode

Distillation carried out with man-
ually set parameters. See Chap-
ter 6.2.4 "Executing Timer
mode", page 53

[Continuous
pumping]

For drying the system after dis-
tillation. See Chapter 6.2.5 "Exe-
cuting Continuous Pumping
mode", page 57

[AutoDest]

mode

For carrying out automatic sin-
gle or multi-stage distillation.
See Chapter 6.2.6 "Executing
AutoDest mode", page 59

[Drying]

mode

Drying of the sample after distil-
lation possible. See Chap-
ter 6.2.7 "Executing Drying
mode", page 61.

[Drying]

mode is not available

for the R-220 Pro.

[Methods]

mode

Distillation carried out according
to a sequence of programmed
steps. See Chapter 6.2.8 "Exe-
cuting Methods mode",
page 63

[eSupport]

For details of sending a ticket to
the local BUCHI technical engi-
neer, see Chapter 8.4 "eSup-
port", page 87

The submenu

[eSupport]

is not

available for the R-220 Pro.

Summary of Contents for Interface I-300







































































































Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands

Buchi Interface I-300, Operation Manual

Search results

Summary of Contents for Interface I-300

Reviews:

Related manuals for Interface I-300

Brands by name

Popular brands