6 | Operation
BÜCHI Labortechnik AG
46/102
Operation Manual Interface I-300 Pro
Fig. 21: Entering the settings
u
Turn the navigation control to select the desired parameter, then press the naviga-
tion control to confirm the selection and choose EDIT. Alternatively, tap the param-
eter directly on the screen.
ð
The selected figure is shown in inverse type and the word "Set" flashes.
Fig. 22: Changing the setting
u
To increase or decrease the figure, turn the navigation control clockwise or
counter-clockwise. Alternatively, enter the figure using the keyboard.
u
To save the new setting, press the navigation control to choose SAVE or tap
SAVE directly on the screen.
ð
The new parameter setting is shown highlighted in green again.
If a reading graph is displayed (see Chapter 6.3 "Displaying reading graphs",
page 67), not all parameters can be shown on the screen at once. In that case, a
scroll bar appears on the screen.
u
To scroll down to a parameter, turn the navigation control or slowly swipe the
screen upwards with your finger.
