6 | Operation
BÜCHI Labortechnik AG
56/102
Operation Manual Interface I-300 Pro
u
Enter the new setting for the timer.
ð
While the parameters are being edited, the distillation process continues run-
ning in the background (identifiable by the
symbol on the status bar).
Fig. 35: Saving edited parameter settings
ð
After the parameters have been altered, the timer jumps to the new setting
and starts counting down the time from the beginning. The progress bar in the
status bar jumps back to the beginning.
u
Edit other parameters as necessary.
Stopping timer-controlled distillation
The timer-controlled distillation process stops automatically when the preset time has
elapsed. After completion of timer-controlled distillation, an audible signal consisting
of three beeps sounds at regular intervals if the corresponding option has been set on
the Configuration menu.
NOTE
The audible signal is canceled as soon as the next user action is registered.
There is the facility for stopping distillation before the set time has elapsed.
u
To stop the timer-controlled distillation process prematurely, press the function
button STOP.
ð
On completion of timer-controlled distillation, the display shows the following infor-
mation:
