Brother P-Touch PT-E800W User Manual Download Page 215

Page: 215 / 254

Troubleshooting

204

Network Setup Problems

Problem

Solution

You are using security software



Confirm your settings in the installation dialog box.



Allow access when the security software alert message appears during the
printer installation.

Your security settings
(SSID/Network Key) are incorrect

Recheck and select the correct security settings.



The manufacturer's name or model number of the wireless access
point/router may be used as the default security settings.



See the instructions supplied with your wireless access point/router for
information on how to find the security settings.



Ask the manufacturer of your wireless access point/router or ask your
Internet provider or network administrator.

Your P-touch labeling system is
placed too far from your mobile
device

Move your P-touch labeling system within about 3.3 ft (1 m) of the mobile
device when you configure the Wi-Fi network settings.

There are obstructions (walls or
furniture, for example) between your
P-touch labeling system and the
mobile device

Move your P-touch labeling system to an obstruction-free area.

A wireless computer, Bluetooth
supported device, microwave oven
or digital cordless phone is near the
P-touch labeling system or the
wireless access point/router

Move other devices away from the P-touch labeling system.

You are using MAC Address filtering You can confirm the MAC address by printing the P-touch labeling system

settings report.

See

Confirming the P-touch Labeling System Settings

on page 112 for more

information.

Your wireless access point/router is
in stealth mode (not broadcasting the
SSID)



You must type the correct SSID name during the installation or when using
the Printer Setting Tool.



Check the SSID name in the instructions supplied with your wireless access
point/router and reconfigure the Wi-Fi settings.

Your P-touch labeling system is not
connected correctly to the network

Check the wireless connection indicator on the LCD.

Connected in Wi-Fi mode.

Disconnected in Wi-Fi mode, so the wireless settings must be
reconfigured.

Connected or disconnected in Wireless Direct mode.

I have checked and tried all of the
above, but still cannot complete the
Wi-Fi settings

Turn off the P-touch labeling system, and then turn it on again. Then try and
configure the Wi-Fi settings again.

Summary of Contents for P-Touch PT-E800W































































































































































































































































Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands

Brother P-Touch PT-E800W, User Manual

Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands