Brother P-Touch PT-E800W User Manual Download Page 19

Page: 19 / 254

Setting Up the P-touch Labeling System

Feeding Tape

Important

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette.
•

Do not pull the label when the

P-touch labeling system

is ejecting it from the tape exit slot.

Doing

so will cause the ink ribbon to be discharged with the tape. The tape may no longer be functional after the
ink ribbon discharges.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.

Feed and Cut

The Feed and Cut function feeds approximately 0.88" (22.3 mm) of blank tape, and then cuts the tape.

Press the

(Feed and Cut) button.

[

Feed & Cut?

] appears on the LCD.

Select [

Feed & Cut

] using the or key, and then press the

Enter

key. The message [

Feeding

Tape... Please Wait

] appears while the tape is fed, and then the tape is cut.

Note

To exit or cancel this function press the

Esc

key.

Feed Only

This function ejects the tape approximately 0.88" (22.3 mm), resulting in a blank label sticking out of the tape
cassette. This action is recommended when using Fabric tapes, which should be cut with scissors.

Press the

(Feed and Cut) button.

[

Feed & Cut?

] appears on the LCD.

Select [

Feed Only

] using the or key, and then press the

Enter

key. The message [

Feeding

Tape... Please Wait

] appears while the tape is fed.

Note

To exit or cancel this function press the

Esc

key.

Summary of Contents for P-Touch PT-E800W































































































































































































































































Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands

Brother P-Touch PT-E800W, User Manual

Search results

Summary of Contents for P-Touch PT-E800W

Reviews:

Related manuals for P-Touch PT-E800W

Brands by name

Popular brands