Using the Data Transferred to the P-touch Labeling System
55
3
Using Transferred Database Data
3
You can transfer a database converted to a *.csv file to the P-touch labeling system.
The data for a database that was transferred without a template can be imported into each label except
auto format layouts and transferred templates. The database data is imported according to the number of
blocks and pages set for each label.
Important
• Before using a database, transfer the database to the P-touch labeling system.
• If a database and template are linked and transferred together, the database can use only that template.
Note
• If the selected database range is larger than the set number of blocks and pages, the data will be imported
until the maximum number of blocks and pages is reached.
• If the set number of blocks and pages is larger than the selected database range, the operation will finish
when the complete database is imported. The remaining blocks and pages will not be printed.
a
Press the
Insert
key, select [
Database
] using the or key, and then press the
OK
or
Enter
key.
b
Select the database you want using the or key, and then press the
OK
or
Enter
key.
The first record of the selected database appears.
Note
• If the selected record is not changed within a certain time while the database is displayed, the contents of
the record will be displayed at the bottom of the screen. However, the contents of the record will not be
displayed if the record contains 11 one-byte characters or fewer.
• When the
Preview
key is pressed, the properties of the record appear.
• When setting the range, the "field names" line (first line of data) cannot be selected.
Summary of Contents for P-Touch PT-E800W
Page 254: ......
