Brother P-Touch PT-E800W User Manual Download Page 207 | Manualshive

Page: 207 / 254

background image

Using the Rechargeable Li-ion Battery (PA-BT-4000LI)

196

24

• If the P-touch labeling system is turned on with the rechargeable Li-ion battery installed and the AC

adapter connected to an AC power outlet, the battery will be recharged. However, when the P-touch
labeling system is turned on, even after the rechargeable battery has been charged, the battery charge
will be used, leaving the battery with less than a full charge the next time the P-touch labeling system is
used. We recommend leaving the P-touch labeling system turned off while charging the battery.

• Although the charging stops if the P-touch labeling system is used to print, feed, or perform another

operation, the charging will start again automatically after the operation is finished if the charging is not
completed.

Stopping Rechargeable Li-ion Battery Charging

24

To stop the battery charging, disconnect the AC adapter.

Notes on Using the Rechargeable Li-ion Battery

24



Before use, fully charge the battery. Do not use it until it is fully charged.



The battery charging must take place in environments between 32°F and 104°F (0°C and 40°C), otherwise
the battery will not charge, and the

(Battery) indicator will remain lit. If the charging stops because the

environment temperature is too low or too high, place the P-touch labeling system with a temperature
between 32°F and 104°F (0°C and 40°C) and try charging again.



If the P-touch labeling system is used to print, feed, or perform another operation when both the battery is
installed and the AC adapter is connected, the

(Battery) indicator may turn off and charging may stop

even if the battery is not fully charged.

Rechargeable Li-ion Battery Characteristics

24

To ensure the highest performance and longest life from the battery:



Do not use or store the battery in a location exposed to extreme high or low temperatures as it may
discharge more quickly. This may happen when using a rechargeable Li-ion battery with a high charge
(90% charged or more) in a location exposed to high temperatures.



Remove the battery when storing the P-touch labeling system for long periods of time.



Store a battery with less than a 50% charge in a cool dry place out of direct sunlight.



Recharge the battery every six months if it is stored for long periods of time.



If you touch a part of the P-touch labeling system while the Li-ion battery is charging, that part of the
P-touch labeling system may feel warm. This is normal, and the P-touch labeling system may be used
safely. However, if the P-touch labeling system becomes extremely hot, discontinue use.

«
...
205
206
207
208
209
...
»

Summary of Contents for P-Touch PT-E800W































































































































































































































































Reviews:

No comments

Related manuals for P-Touch PT-E800W

Brand: La Spaziale Pages: 11

Brand: La Spaziale Pages: 16

Brand: U-Line Pages: 57

Brand: T-Fal Pages: 24

Brand: ACM SRL & Escpresso Pages: 25

Brand: Xavax Pages: 40

Brand: Beper Pages: 44

Brand: Lynx Pages: 28

Brand: Cobra Systems Pages: 16

Brand: BRAVILOR BONAMAT Pages: 28

Brand: Brady Pages: 201

Brand: Xiamen Hanin Electronic Technology Pages: 104

Brand: ELIS & Elsa Pages: 28

Brand: Jata hogar Pages: 2

Brand: La Pavoni Pages: 178

Brand: BIXOLON Pages: 81

Brand: Whirlpool Pages: 2

Brand: Whirlpool Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands