Briggs & Stratton 115400, Manual

Page: 83 / 281

82
4
When all components are properly aligned;
4. Torque manifold bolts ([ A ] Fig. 18) to listed
values. SEE SECTION 14- ENGINE
SPECIFICATIONS.
5. Torque bracket bolts ([ B ] Fig. 18) to listed
values. SEE SECTION 14- ENGINE
SPECIFICATIONS.
6. Install manifold guard bracket and torque
to listed values.
7. Install the muffler heat shield bracket [ A ]
with four screws. Torque to listed values.
Fig. 18
8. Secure muffler guard ([ A ] Fig. 19) to its
bracket with four screws and torque to
listed values.
Fig. 19
9. Install carburetor heat shield ([ B ] Fig. 19)
with two mounting screws ( C ) and torque
to listed values
REMOVE/INSTALL EXHAUST
SYSTEM
(260700, 261700)
Fig. 20
To remove muffler from model 261700:
1. Remove the engine blower housing. SEE
SECTION 3- ENGINE DISASSEMBLY.
2. Remove the two lower bolts ( A ) that hold
muffler to bracket ([ B ] Fig. 21).
Fig. 21
3. Loosen muffler clamp nut ([ C ] Fig. 21) and
spread clamp slightly with screwdriver.
4. Take note of the different sizes and
remove the two bolts and three screws