Briggs & Stratton 115400, Manual

Page: 123 / 281

122
5
( D ) and float bowl screw washer ([ B ] Fig.
109).
Fig. 109
2. Remove float hinge pin ( A ), ca rburetor
float ( B ) and float needle valve ([ C ] Fig.
110).
Fig. 110
3. Remove main jet first ([ A ] Fig. 111) with a
carburetor jet scr ewdriver.
4. Remove carburetor emulsion tube ([ B ]
Fig. 111).
5. Remove rubber plug ([ C ] Fig. 111).
Fig. 111
6. Remove screw ([ A ] Fig. 112).
7. Remove, throttle plate ( B ), throttle shaft
( C ) and seal ([ D ] Fig. 112).
Fig. 112
8. Remove screw ( A ), choke plate ( B ), choke
shaft ( C ) and choke shaft seal ([ D ]
Fig.113).