Briggs & Stratton 115400, Manual

Page: 112 / 281

111
5
Fig. 71
Disasse mbly
1. Remove the float bowl moun ting screw
( C ), washer ( B ) and float bowl ([ A ] Fig.
72).
Fig. 72
2. Remove float bowl gasket ( A ).
3. The float hinge pin is a wedge fit. One end
of float hinge pin has two flats ([ B ] Fig.
73). Tap the opposite end of the pin until
loose.
Fig. 73
4. Remove the pin, float and inlet needle
assembly.
5.
Remove fixed main
( B )
jet from end of
fuel pick up tube first, Fig. 74, then
remove the emulsion tube ([
A ] Fig. 74).
Fig. 74
If emulsion tube does not come out with jet:
•
Reach into carburetor throat with flat
blade screwdriver and gently tap top
of stuck emulsion tube until it comes
out (Fig. 75).