Fig. 12-1: Parameter set selection by b0.12
●
By digital input:
Parameter set switch will be carried out with an digital input if one of the pa-
rameters E1.00…E1.03 is set to option “46: Parameter set selection”. If one of
the digital inputs is configured to option 46 it will override the setting of
b0.12 and load the parameter set according to the digital input during power
up. If try to change the value of [b0.12] while digital input is active, 'S.Err' will
be shown.
Fig. 12-2: Parameter set selection by digital input
Terminal value is considered for active parameter set selection only during
STOP mode.
During parameter default loading both parameter sets will be restored to default
values. During parameter set switch from set 1 to set 2, “PAr2” will be displayed
on panel and during switching from set 2 to set 1, “PAr1” will be displayed with
the following restrictions.
VFC 3210
Bosch Rexroth AG
Functions and Parameters
DOK-RCON04-VFC3210****-IT01-EN-P
77/253