background image

22.  Danger of explosion if battery is incorrectly replaced. Replace only with the same or 

equivalent type. Dispose of the replaced battery in an environmentally friendly way. 

 

Cleaning 

You can clean the unit with a moist fluff-free cloth or shammy leather cloth. 

 

Warning 

This device is intended for use in public areas only. Surreptitious recording of oral 

communications is may prohibited by law. 

 

Unpacking 

Check the package for visible damage. If any items appear to have been damaged in 

shipment, notify the shipping company. Unpack carefully. This is electronic equipment and 

should be handled with care to prevent damage to the unit. Do not attempt to use the unit 

if any components are damaged. If any items are missing, notify the dealer. 

The shipping carton is the safest container in which to transport the unit. Save it and 

all packing materials for future use. If the unit must be returned, use the original packing 

materials. 

 

Packaging contents 

The package should contain the following items: 

1.  Digital Video Recorder 

2. Accessories 

box 

 

7

Summary of Contents for SVR-80xx-S series









































































































































Reviews: