Bolide Technology SVR-80xx-S series User Manual Download Page 55

Page: 55 / 136

rights will be aborted.

User rights description

“Local Rights”:

Local rights are for local operation, such as the operation using front panel, IR

controller and RS-485 keyboard.

PTZ control: Locally control PTZ;

Record: Manual start/stop recording;

Playback: Local playback and backup the recorded files;

Parameters Setup: Locally setup the DVR parameters;

Log: Locally view the log on DVR;

Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR,

etc.

“Remote Rights”:

PTZ Control: Remote control PTZ;

Record: Remote manual start/stop recording;

Playback: Remote playback, download the recorded files on DVR;

Parameters Setup: Remote setup the DVR parameters;

Log: Remote view the log on DVR;

Utilities: Remote upgrade firmware, format HDD, reboot DVR and shut down DVR,

etc.

Voice: Client talks with DVR;

Preview: Network live preview;

Alarm: Remote control DVR alarm output;

Local Video Out: Remote control DVR video output;

Com Control: DVR RS-232 transparent channel function.

MAC address

Summary of Contents for SVR-80xx-S series









































































































































Search results

Summary of Contents for SVR-80xx-S series

Reviews:

Related manuals for SVR-80xx-S series

Brands by name

Popular brands

Bolide Technology SVR-80xx-S series, User Manual

Search results

Summary of Contents for SVR-80xx-S series

Reviews:

Related manuals for SVR-80xx-S series

Brands by name

Popular brands