Move “Active Frame” to the “Adjust” button on the right side of Brightness, Contrast,
Saturation and Hue, press
[
ENTER
]
key, you will enter into the corresponding adjust
interface. In the adjust interface, there is one scroll bar at the bottom, you can use
[
È
] [
Ç
]
keys to adjust and can find the video image will be changed at the same time. When you
are satisfied with the real time video image, press
[
ENTER
]
to return “Image Setup” menu.
Step 4:
You can copy the video parameters of current camera to any other cameras.
Or you can repeat setp2 and step3 to adjust for any other camera.
After adjust, in “Image Setup” menu, press “Confirm” button to save parameters and
make them into effective. Otherwise, press “Cancel” button or
[
ESC
]
key to abort
modification.
66
Summary of Contents for SVR-80xx-S series
