Bolide Technology SVR-80xx-S series, User Manual

Page: 22 / 136

15 Reserved Reserved for future usage
16 F1 Same as [F1] key of front panel
17 Lens control IRIS, FOCUS ZOOM for lens control
18 F2 Same as [F2] key of front panel
Loading the batteries into the IR controller
1. Remove the battery cover.
2. Insert the battery. Please take care that the poles (+ and -) are correctly
positioned.
3. Replace the battery cover.
Start to use IR controller
Press [DEV] key, input the DVR device ID (default is “88”, can be changed
in “Display” menu) and then press [ENTER] key. If the “STATUS” lamp of DVR
front panel is turned into green, it means you can use IR controller to operate
this DVR.
Stop using IR controller
When IR controller status is on, press [DEV] key again, the “STATUS”
lamp will be turned off. The IR controller can not control this DVR.
Switch the DVR off
When IR controller status is on, press [POWER] key for several seconds,
the DVR will be powered off.
When IR controller can not work normally
z Check batteries poles.
z Check the remaining charge in the batteries.
z Check IR controller sensor is mask.
Please change another IR controller to try again. It the problem is still
existed, please contact administrator.
22