Bolide Technology SVR-80xx-S series User Manual Download Page 101

Page: 101 / 136

5.14.6 Cruise

Setup

Cruise is remembering the track of PTZ movement. Please make sure the PTZ you

are using can support cruise function.

In “PTZ” menu, press “Setup” button on the right side of “Cruise” item, you can enter

into “Cruise” setup menu:

Press “RecCru” button, you will enter into “PTZ control” interface. You can start

controlling PTZ with direction keys, press

[

ENTER

]

to save the operation track and return

“Cruise” setup menu. Press “StartCru” button to repeat the PTZ track until you press

“Stop” button.

Press “Return” button back to “PTZ” menu. In “PTZ” menu, press “Confirm” button to

save this cruise.

Please make sure the PTZ you are using can support cruise function.

101

Summary of Contents for SVR-80xx-S series









































































































































Search results

Summary of Contents for SVR-80xx-S series

Reviews:

Related manuals for SVR-80xx-S series

Brands by name

Popular brands

Bolide Technology SVR-80xx-S series, User Manual

Search results

Summary of Contents for SVR-80xx-S series

Reviews:

Related manuals for SVR-80xx-S series

Brands by name

Popular brands