-
Fit VANOS oil line banjo bolt with
new seals. Attach oil line to VANOS
unit.
Tightening torque
Oil line to VANOS
unit (banjo bolt)
32 Nm (24 ft-lb)
-
Attach electrical harness connectors
to camshaft position sensors and
VANOS solenoid valves.
-
Remove BMW special locking tools
from rear of cylinder head.
-
Remove BMW special locking tool
from flywheel and replace dust
guard.
Install intake camshaft plastic baffle and
then install cylinder head cover.
Check for correct seating of
half-moon seals (
A
) in back of
cylinder head cover.
Use a small amount of
3-Bond®1209 or equivalent sealant
at corners (
B
) of half-moon cutouts.
Similarly, seat gasket and seal
corners in front of cylinder head, at
VANOS unit.
Tightening torque
Cylinder head
cover to cylinder
head (M6)
10 Nm (89 in-lb)
-
Remainder of installation is reverse
Camshaft Timing Chain
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/1...
11 of 19
2/25/2009 9:52 PM
Summary of Contents for 1999-2005 M3
Page 1: ......
