Outer CV joint boot, replacing
Note:
When replacing CV boots, use
complete boot repair kits. A kit will
include a new boot, clamping bands,
special lubricant, and a new outer CV
joint axle circlip. A kit is available from
an authorized BMW dealer parts
department.
-
Remove drive axle from vehicle as
described earlier.
-
Release retaining clamps from
both ends of outer CV boot.
-
Using a hammer, pound outer CV
joint off drive axle.
-
Using a flat blade screw driver, pry
spring clip off drive axle splines.
-
Clean all old lubricant off axle
splines.
Note:
To inspect a CV joint, clean away
grease and look for galling, pitting and
other signs of wear or physical damage.
Polished surfaces or visible ball tracks
alone are not necessarily cause for
replacement. Discoloration due to
overheating indicates lack of
lubrication.
-
Place new clamping bands and
CV boot over drive axle.
-
Replace spring clip on splined
end of drive axle.
Front Axle Final Drive
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/3...
8 of 13
2/25/2009 10:27 PM
Summary of Contents for 1999-2005 M3
Page 1: ......
