received at the GM V. Therefore Car
Memory/Key Memory features will not be
activated.
Remote key initialization
Initialization of FZV keys is required to
establish lock/unlock signal
synchronization with the GM V. The
initialization procedure provides the GM
V with a key identification number and a
"rolling code" for each key. If initialization
is not performed, the GM V will not
respond to the key signals.
Up to 4 remote keys can be initialized.
They must be initialized at the same
time. Key initialization is only possible
with the vehicle unlocked.
-
Close all doors and have all keys
available.
-
Using key number 1, turn the
ignition switch to KL R (accessory
position), then switch off within 5
seconds and remove the first key.
-
Within 30 seconds of turning the
ignition switch to OFF Press and
hold button #2
-
While holding button #2, press and
release ("tap") button #1 three times
within 10 seconds.
-
Release both buttons.
Note:
The Key Memory function of the GM
responds to the key identification number
of each key. If the keys are not initialized
in the same order prior to initialization,
Central Locking and Anti-Theft
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/5...
11 of 14
2/25/2009 10:53 PM
Summary of Contents for 1999-2005 M3
Page 1: ......
