70
MULTIPORT SPOOLER VIII (4-, 8-, and 12-Port Models)
Command Validation
Specify whether or not returned messages are
verified. The Message-Return Verification screen
appears (see
Section 6.3.7
).
Print Configuration
Print the MPSWIN configuration. The
configuration-printing screens appear
(see
Section 6.3.9
).
Save
Save the revised configuration.
Exit
Quit the configuration program.
If you select Exit to quit the configuration program, and did not modify the
configuration, you immediately return to Windows. However, if you did
modify the configuration, you are prompted to save it (if you have not done
so already). After saving, you are prompted to close and then reload Windows
to make the new parameters active. If you exit the configuration program
without accepting the modifications you made, you will return to Windows.
NOTE
Whether you choose to return to Windows or to DOS, MPSWIN is
activated the next time you load Windows.
Summary of Contents for PI750A
Page 119: ...111 APPENDIX A Cable Pinouts IBM AT to MPS VIII DB9M to DB25M...
Page 173: ...NOTES...
