Black Box PI750A, Manual

Page: 57 / 173

49
CHAPTER 5: DOS Software Installation: UCTP and MPSDOS
Token
If you have more than one Multiport Spooler VIII unit interconnected in a
daisychain or cascade, the token specifies which unit you are sending
commands
to
(as opposed to
through
). If you are using only one unit, set the
token number to “0.” If several units are connected together, set the value to
the number of units through which your command must go before reaching
the unit you want the command to reach. For example if you have three units
in a chain, and want to send the command to the third, set the value to “2”
(because the command goes through the first and second unit). Refer to
Section 7.3.3 .
Hot keys
Hotkeys are your way of instantly accessing the UCTP menu when you have it
resident. This field lists the possible hotkey combinations that you can select
from. The default is Left Shift + Right Shift, but if you want to run another
software package that must use Left Shift + Right Shift for its own purposes,
you can select another of the ten different combinations available:
Left-Shift + Right-Shift
Ctrl + Right-Shift
Ctrl + Left-Shift
Alt + Right-Shift
Alt + Left-Shift
Alt + Ctrl
Ctrl + Left-Shift + Right-Shift
Alt + Left-Shift + Right-Shift
Alt + Ctrl + Right-Shift
Alt + Ctrl + Left-Shift