26
MULTIPORT SPOOLER VIII (4-, 8-, and 12-Port Models)
Stop Bit
Purpose
Determines the number of stop bits on the chosen
port.
Applies To
Serial ports only.
Possible Values
1 or 2 (1 is the default).
Usage Notes
Set the number of stop bits of the Multiport Spooler
VIII port to match the number of stop bits of the
device to which it is connected.
Parity
Purpose
Determines the parity type.
Applies To
Serial ports only.
Possible Values
None, Even, or Odd (None is the default).
Usage Notes
Set the parity of the Multiport Spooler VIII port to
match the parity of the device to which it is
connected.
Handshaking
Purpose
Determines handshaking (flow control) protocol.
Applies To
Serial ports only.
Possible Values
DTR/CTS (hardware) or X-ON/X-OFF (software).
The default is DTR/CTS.
Usage Notes
If you have selected software flow control, you can
choose whichever control codes you want to take the
place of the the X-ON and X-OFF characters. (This is
helpful for people who are using ENQ/ACK or other
less popular types of software flow control.) Refer to
the entries for the
Character [X-on]
and
Character
[X-off]
parameters later in this section.
Summary of Contents for PI750A
Page 119: ...111 APPENDIX A Cable Pinouts IBM AT to MPS VIII DB9M to DB25M...
Page 173: ...NOTES...
