Black Box PI750A, Manual

Page: 124 / 173

116
MULTIPORT SPOOLER VIII (4-, 8-, and 12-Port Models)
All commands disabled for duration of link.
Link allowed only between 2 serial bidirectional ports.
Link with port #5 until Break is sent.
@@/Z5@
/Z—Set permanent bidirectional link
All commands disabled for duration of link.
Link allowed only between 2 serial bidirectional ports.
Link with port #5 until timeout expires or Break is sent.
@@/Y5@
/Y—Set temporary bidirectional link
Activate pause for all following tasks. Deactivate pause for all tasks sent to this port. Release first job in buffer from pause. Release all jobs from pause.
@@/A1@ @@/A0@ @@/A2@ @@/A3@
/A—Pause between tasks
Timeout on output port of preceding MPS-VIII must be longer than on input port of next MPS-VIII.
You must have at least two MPS-VIIIs. Input port must be redirected to output port leading to next MPS-VIII.
The command
P4
will
bypass the first MPS-VIII and be executed by the second MPS-VIII.
@@/1P4@
Use several cascaded MPS-VIIIs
Timeout can be 1 to 999 seconds.
Sets the end-of-job timeout to 39 seconds.
@@/T39@
/T—Modify a timeout
All tasks received by the current port are canceled.
@@/K@
/K—Cancel a task
Header is preserved even if deactivated. Maximum length is 60 characters.
The header must be activated before printing.
The header “JOHN” is printed ahead of each task.
@@/SJOHN@
/S—Define header
A default header is defined if you have not defined one.
Activates header. Deactivates header.
@@/H1@ @@/H0@
/H—Activate/deactivate header