Bionet BM Elite Series, Instructions For Use Manual

Page: 91 / 215

Rev. 5.01
91
DIAGONOSIS 0.05Hz ~150Hz
A-3-3. Size (sensitivity)
Changes the display amplitude of the
ECG waveform. 0.25, 0.5, 1, 2,
4mm/mV
A-3-4. HR source
The cardiac source can be selected as
ECG or SpO2, AUTO. ECG, SpO2, AUTO
A-3-5. View channel
Set the number of channels of ECG
waveform to be displayed on the
screen.
When selecting 1CH, ECG waveform of
1CH is displayed in two lines.
3LEAD: Only 1CH is displayed
5LEAD: 1CH, 2CH, 7CH display
1CH,
2CH,
7CH
A-3-6. Trace 1, Trace 2
The ECG channel is selectable from I to
V
When using the 3 lead cable selection,
only TRACE I can select I, II, III.
When using 5 lead cable selection, I, II,
III, aVR, aVL, aVF, V can be selected.
I, II, III, aVR, aVL, aVF,
V
A-4. Arrhythmia Arrhythmia alarm setting menu
A-5. ST/PVC
PVC Diagnostic setting, ST template
channel selection, ST analysis and ISO
(R-) / ST (R +) value setting
A-5-1. PVC analysis
PVC Diagnostic Results Display Setup
Menu ON/OFF
A-5-2. ST template Ch
ST Diagnostic ECG Channel Setup
Menu (Menu display according to the
currently connected cable) Lead I, II, III, aVR,
aVL, aVF, V
A-5-3. ST analysis
ST Diagnostic ECG Channel Setup
Menu
A-5-4. ISO(R-) ISO Point Position Setting Menu 120 ~ 4ms
A-5-5. ST(R+) ST point position setting Menu 4~160 ms