Bionet BM Elite Series, Instructions For Use Manual, Page: 33 / 215

Rev. 5.01
33
Power
The BM Vet Elite series Veterinary Multiparameter Monitor uses a DC power adaptor (100-240 VAC
/ 18VDC 2.8A). In the event of a power outage or cable shortage, the monitor automatically switches
to battery power to continue veterinary multiparameter monitoring without data loss. The built-in
battery is intended for back-up use only during power-off.
DC Adaptor information
Manufacture: BRIDGEPOWER CORP.
Model name: BPM050S18F02
Input Power: 100~240V 1.5A
Output Power: 18 V, 2.8 A
DC Power LED is lighted on when the DC Power is plugged into the inlet at the back of the product.
A press of power key makes the machine ready for use.
Caution
This equipment must be connected to a protective earth grounded power
supply.
Using non-standard products other than the adapters supplied by us may cause
signal distortion or noise. Be sure to use a genuine adapter that is supplied by
our company and is insulated.
Do not position the device in a place where it is difficult to unplug its power
supply cord.
Battery Power
It uses battery power when there is a power failure and for portable use.
The battery is attached to the bottom of the equipment.