Bionet BM Elite Series, Instructions For Use Manual

Page: 121 / 215

Rev. 5.01
121
lower than normal.
It takes about 20 ~ 30minutes to reach temperature equilibrium by attaching
this sensor.
Warning
If the animal is sweaty or moving heavily, fix the temperature sensor with
surgical tape.
The temperature sensor must be connected in the correct position and secured
so as not to be separated from the animal. The temperature cable should be
attached to the monitor.
Temperature Settings
Menu Description Available settings
A. Temp
A-1. Alarm Temp alarm settings menu
A-1-1. Parameter alarm limit
TEMP1, TEMP2, DELTA TEMP Parameter
alarm level, action setup menu 0 ℃ ~ 50.0 ℃
(32 ° F ~ 122 ° F)
A-1-2. Technical alarm
condition
TEMP1-probe off
TEMP2-probe off
1)
A-2. Display option 1) Temperature waveform display setting
A-2-1. Delta display 1)
It can set whether to display two
temperature differences as a value.
On / Off
A-2-2. Temp. order 1)
It can set the order of the temperature
differences. TEMP1 – TEMP2
TEMP2 – TEMP1
A-2-3. 2 channel view 1)
2 channels display setup.
If only 1 channel is used, set it to off.
When using 1 channel, which channel
to use is determined by Temp order.
On / Off
1)
: BM5Vet Elite/BM7Vet Elite only