Bionet BM Elite Series, Instructions For Use Manual

Page: 122 / 215

Rev. 5.01
122
13. EtCO2
Overview
The BM Vet Elite Series monitor measures concentrations of end-tidal CO2 (EtCO2) when this option
is enabled and the EtCO2 module is connected to your monitor.
The EtCO2 module can perform mainstream measurements in all monitoring modes as well as
sidestream measurements.
Precaution
Warning
Veterinary Multiparameter monitors that measure CO2, anesthetics, and / or
respiratory mechanics cannot be used as apnea monitoring and / or recording
equipment. While these products provide an apnea alarm, the alarm condition
begins with the elapsed time from when the last breath was detected.
However, there are a number of physiological indications for the clinical
diagnosis of real apnea events.
The CO2 alarm is not activated until the first breath is detected after the
monitor is turned on or the patient is discharged.
Accuracy of the CO2 and breathing rate measurements may be impaired due
to improper attachment of the sensor or due to certain patient conditions and
certain environmental conditions.
If the tube connection is faulty, loose or damaged, gas may leak and the
accuracy of the measurement may be lowered, resulting in poor breathing. To
prevent this, connect all component is securely and check the connection
according to standard clinical procedures to ensure that there are no leaks.