Bionet BM Elite Series, Instructions For Use Manual

Page: 16 / 215

Rev. 5.01
16
Caution
The Equipment should be placed far from generators, X-ray equipment,
broadcasting equipment or transmitting wires, so to prevent electrical noises
from being generated during the operation when these devices are near the
Equipment, it can produce inaccurate measurements. For BM series Veterinary
Multiparameter Monitors both independent circuit and stable grounding are
essentially required. In the event that the same power source is shared with
other electronic equipment, it can also produce inaccurate output.
Note
BM3Vet Elite, BM5Vet Elite, BM7Vet Elite a re classified as follows:
- BM3Vet Elite, BM5Vet Elite, BM7Vet Elite classifies as Class I, BF & CF
concerning electric shock. It is not proper to operate this Equipment around
combustible anesthetic or dissolvent.
- Noise level is A class regarding IEC/EN 60601-1, and the subject of Nose is A
level concerning IEC/EN60601-1-2.
Warning
Do not touch the animal while using a defibrillator. The user may be at risk.
When using a defibrillator, be careful about safety and use only the supplied
cable.
Warning
In case the Equipment does not operate as usual or is damaged, do not use
on animals, and contact the medical equipment technician of the hospital or
the equipment supply division.