Bionet BM Elite Series, Instructions For Use Manual

Page: 152 / 215

Rev. 5.01
152
A-1-5. Waveform3 Channel 3 waveform select
aVF, V, IBP1 1) , IBP2 1) ,
A-1-6. Print key
In the PRINTER Key menu, press the
printer key to set the output point as
shown below
REAL TIME: Prints the data from the
point where the PRINTER key was
pressed.
DELAY: Prints data before 5 seconds
when PRINTER key is pressed
Real time
Delay (5sec)
A-1-7. Printing period
Set the time for printing the printout on
normal printout. If you do not stop
manually after pressing the PRINTER
KEY, the output will be output only for
the following period of time.
Continue,
10sec,
20sec,
30sec
1) : BM5Vet Elite, BM7Vet Elite only
1) : BM5Vet Elite, BM7Vet Elite only
Thermal Paper Storage
To avoid print quality degradation or attenuation of printouts, follow these precautions:
Note
These precautions apply to both unused paper as well as paper that has already
been run through the printer.
Note
During printing time, the wave forms of IBP1 1) , IBP2 1) , ETCO2 on paper look
different from the wave forms on screen. The reason is that the wave forms
on screen cannot be scaled, but the wave forms on paper can be scaled.