Bionet BM Elite Series Instructions For Use Manual Download Page 31

Page: 31 / 215

Rev. 5.01

Warning

USB compatible

The BM Vet series monitor is compatible with external USB memory drives up
to 64GB.

We recommend the product brands listed in the manual (Sandisk, PNY,
Transcend, Samsung).

When using a product with high power consumption, such as an external hard

drive, be sure to use the provided adapter for suitable power supply. (Monitor
cannot be used alone as a power supply)

You should save the data of connected device before connecting the additional
device.

High power devices may not be supported. .

Note

The HDMI output of (BM3Vet Elite, BM5Vet Elite) is 800x600 @59Hz and
(BM7Vet Elite) is 1024x768 @60Hz.

Depending on the specifications of the external monitor, it may not be
displayed on the screen, so please check it beforehand.

Device Markings

Caution :

Consult accompanying

documents

European Medical Device

Directive 93/42/EEC

Type CF applied part

Type BF applied part

IP (Ingress Protection)

ECG

Summary of Contents for BM Elite Series
























































































































































































































Search results

Summary of Contents for BM Elite Series

Reviews:

Bionet BM Elite Series, Instructions For Use Manual, Page: 31 / 215

Search results

Summary of Contents for BM Elite Series

Reviews: