Bionet BM Elite Series, Instructions For Use Manual

Page: 116 / 215

Rev. 5.01
116
Cuff Selection and Placement
The quality of NIBP monitoring depends largely on the quality of the signals received by the monitor.
For this reason, it is important to select the correct cuff size for your animal. Cuff sizes are clearly
marked on the cuff. Measure the circumference of your animal’s limb. Use only Bionet cuffs with
your monitor.
Warning
Ensure you do not block the connecting hose when you put the cuff on the
animal.
Check cuff or hose connection for leaks periodically. Measurements can be
inaccurate if air leaks.
NIBP cannot be taken under all conditions. Even manual methods, employing
a sphygmomanometer and stethoscope, will not work on unstable or active
animals.
Pressurization of the CUFF can temporarily cause loss of function to
simultaneously used monitoring medical electrical equipment on the same
limb
Check that operation of the NIBP does not result in prolonged impairment in
the circulation of the blood of the animal
Warning
When placing the cuff on an animal, be careful not to bend the NIBP
extension tube or the NIBP cuff connection hose.
Check periodically the cuffs and connecting hoses. Leaking air can cause
inaccurate measurements.