Bionet BM Elite Series, Instructions For Use Manual

Page: 114 / 215

Rev. 5.01
114
is measured, pressurize to the set
pressure value every time
A-5. Measurement Interval
A menu to set Interval time when the
blood pressure is measured.
After setting INTERVAL, you must press
NIBP KEY to start NIBP measurement.
1min, 2, 3, 4, 5, 10,
15, 20, 30, 60, 90,
2 hours, 4, 8
A-6. Vital sign review
Record the last 40 blood pressure
readings.
Warning
Check periodically to see if the circulation from the cuff to the distal part of
the
animal’s limb is good.
1minute and 2minute intervals when using automatic measurement, check the
animal’s condition frequently. It is not recommended for measuring blood
pressure for a long time if the measurement time period is set to 10minutes
or less.
When changing the cuff, be sure to adjust the actual size of the cuff and the
size of the cuff set on the equipment.
Note
Safety Considerations
Software and Hardware for Cuff pressure Blocking
The cuff is automatically deflated when the measurement time is longer than
two minutes in Cat/ Dog/ Horse mode and more than 90seconds in Puppy
mode. Extension limits are set for all animal categories to prevent overpressure
on the animal.
The maintenance is performed every 2 years
(See maintenance recommendations section in this manual)
Check the following list of devices to always operate properly and safety.