Berlin Heart EXCOR Pediatric VAD, Manual, Page: 83 / 250

Chapter 6 Instructions for use: Ikus
INSTRUCTION
1. The monitor program is running. It now displays the field User ID . Enter user
ID. The monitor program now displays the field Password .
2. Enter the password and confirm the password with <Enter> . The monitor pro­
gram will now display the field Log off . The user now is logged into the moni­
tor program.
The alarm circuit test follows.
Logging out
INSTRUCTION
1. Select the menu item Log off , then press <Enter> to confirm. The monitor
program now displays the field User ID . The user now is logged out of the
monitor program. No further entries are possible until next login.
Cautionary measure
To ensure patient’s safety, the user always has to log out of the monitor program
before leaving the vicinity of the system.
6.2.5 Standard view – monitor program
WARNING
The displayed pressure graphs refer to the pneumatic pressures
generated internally by the system and are given in millimeters of
mercury [mmHg]. They do not display the patient’s blood pressure and
cannot replace diagnostic measures by the medical personnel.
IMPORTANT: The monitor program also has 2 other views, which, however, are only
displayed when the
Ikus is being started or can be called up by the command Drive
pause .
• view Select operating mode , see Fig. 7-3, page 97
• view Pump size and single-step mode , see Fig. 7-7, page 100
Fig. 6-12 Standard view of monitor program during start-test
a
b
c
1000721x09 Revision 8
73