manualshive.com logo in svg

Berlin Heart EXCOR Pediatric VAD, Manual, Page: 64 / 250

Share
Download
Berlin Heart EXCOR Pediatric VAD Manual Download Page 64

Chapter 4  Description: blood pump, cannulae and accessories 

7 

6 

4.1 

EXCOR blood pumps 

1 

1 

driving tube connector 

2 

triple-layer membrane 

3 

blood chamber (de-airing nip­
ple at back of pump) 

8 

9 

4 

arrow mark: indicates blood 

2 

flow direction 

3 

5 

inflow stub 

4 

6 

titanium connector: inflow stub 
– inflow cannula 

5 

7 

titanium connector: outflow 
stub – outflow cannula 

8 

outflow stub 

9 

air chamber 

Fig. 4-2 

60 ml blood pump 

EXCOR blood pumps have a transparent polyurethane (PU) housing which is divided 
into an air chamber and a blood chamber by a triple-layer membrane. 
The blood chamber has an inflow and an outflow stub to which the inflow and outflow 
cannula, respectively, are connected. The pump stubs themselves are made of 
polyurethane, the end of each stub is fitted with a titanium connector to which the 
cannula will be connected. The valves located in the pump stubs keep the blood 
flowing in one direction. EXCOR blood pumps are available with three-leaflet valves 
made of polyurethane (10 - 60 ml stroke volume). 
All surfaces of the pump coming into contact with the blood are coated with a 
Carmeda

®

 BioActive Surface (CBAS) coating. The transparent casing of the blood 

pump allows easy visual monitoring of the filling and emptying of the blood chamber. 
The blood pump is equipped with a de-airing nipple which is used for de-airing the 
blood chamber when the pump is being commissioned. 
The air chamber of the pump is equipped with a driving tube connector. This connector 
is used to connect the blood pump to the driving tube through which air is pumped from 
the Ikus. Ikus generates the suction and driving pressures required to move the blood 
pump’s triple-layer membrane. A graphite powder layer is located between the 
membrane layers in order to minimize friction. 

4.2 

EXCOR cannulae 

3 different types of cannulae are available for EXCOR in various sizes for each type: 

•  atrial cannulae (as inflow cannulae) 
•  LV apex cannulae (as inflow cannulae) 
•  arterial cannulae (as outflow cannulae) 

The cannulae are made of tissue-friendly silicone. Polyester-velour suture rings 
enable convenient and safe anastomosis of the cannulae. The mid section of all 
cannulae is covered with polyester-velour in order to promote good ingrowth of the 
cannulae where they pass through the skin. 
Some arterial cannulae have a shaping wire which allows the cannulae to be adapted 
to each individual patient’s anatomic conditions. 

1000721x09 Revision 8 

54 

Summary of Contents for EXCOR Pediatric VAD



























































































































































































































































Reviews:

No comments