BENSHAW RSi GM2 Series, Instruction Manual

Page: 103 / 282

Learning Advanced Features
890054-00-00
GM2 Series VFD 93
Advanced Tasks Use Example Ref.
2 nd Motor
Operation
Used to switch equipment operation by connecting two
motors to one inverter. Configure and operate the second
motor when the input terminal is activated.
p.134
Commercial power
source transition
Used to switch the power source to the motor from the
inverter output to a commercial power source, and vice
versa.
p.135
Cooling fan control Used to control the cooling fan of the inverter. p.136
Timer settings
Configure an output relay as a timer with On/Off delay
times.
p.139
Brake control
Used to control the On/Off operation of an electro-
mechanical braking system.
p.140
Relay On/Off
control Control the state of an output relay based on an analog
input value.
p.141
Press regeneration
prevention Used during a press operation to handle motor
regeneration, by increasing the motor operating speed.
p.142
* Draw operation is an open loop tension control. This feature allows a constant tension to be
applied to the material that is drawn by a motor-driven device, by fine-tuning the motor speed
using operating frequencies that are proportional to a ratio of the main frequency reference.