BENSHAW RSi GM2 Series, Instruction Manual

Page: 210 / 282

RS-485 Communication Features
890054-00-00
GM2 Series VFD
200
Comm.
Address
Parameter Scale Unit Assigned Content by Bit
B1 Relay 2 (0.4 – 7.5 kW, OU.33: None)
B0 Relay 1 (0.4 – 7.5 kW, OU.31: None)
0h0387 Reserved - - Reserved
0h0388 PID reference 0.1 % PID reference command
0h0389 PID feedback value 0.1 % PID feedback value
0h038A Motor rated current 0.1 A -
0h038B Motor rated voltage 1 V -
0h038C –
0h038F
Reserved - - Reserved
0h0390 Torque Ref 0.1 % Torque command
0h0391 Fwd Pos Torque Limit 0.1 % Forward motoring torque limit
0h0392 Fwd Neg Torque Limit 0.1 % Positive-direction regeneration torque limit
0h0393 Rev Pos Torque Limit 0.1 % Reverse motoring torque limit
0h0394 Rev Neg Torque Limit 0.1 % Negative-direction regeneration torque limit
0h0395 Torque Bias 0.1 % Torque bias
NOTE: A frequency set via communication using the common area frequency address
(0h0380, 0h0005) is not saved even when used with the parameter save function. To save a
changed frequency to use after a power cycle, follow these steps:
Set a frequency reference after setting the frequency reference source to 1
(Keypad-1).
Set the frequency via communication into the parameter area frequency address
(0h1D04).
Perform the parameter save (0h03E0: '1') before turning off the power. After the
power cycle, the frequency set before turning off the power is displayed.
Memory Control Area Parameter (Read and Write)
Comm.
Address
Parameter Scale Unit
Changeable
During
Operation
Function
0h03E0
Save parameters - - X 0: No, 1: Yes
0h03E1
Monitor mode
initialization
- - O 0: No, 1: Yes
0h03E2 Parameter initialization
- - X
0: No, 1: All Grp, 2: Drv Grp
3: bA Grp, 4: Ad Grp, 5: Cn Grp
6: In Grp, 7: OU Grp, 8: CM Grp
9: AP Grp, 12: Pr Grp, 13: M2 Grp,
14: Operation group
Setting is prohibited during fault
interruptions.
0h03E3
Changed parameter
display
- - O 0: No, 1: Yes
0h03E4
Reserved - - - Reserved
0h03E5
Delete all fault history - - O 0: No, 1: Yes
0h03E6
Delete user-registrated
codes
- - O 0: No, 1: Yes
0h03E7
Hide parameter mode 0 Hex O Write: 0 – 9999